Operations for ios&android system client
A.APP Installation
1.Turn on your mobile device and enter APP Store or Google Play Store.
2.Search TOTEM software, and download.
3.Install the APP software.
B.WiFi Connection:
1.Power on 5.8GHz transmitter and FPV camera firstly.
2.Power switch on WiFi device,WiFi switch on,WiFi LED turn green.
3.Open your devices WiFi setting and locate the WiFi name TOTEM. Connect to TOTEM WiFi (Default password: 12345678).
4.With the WiFi connected, open the TOTEM app,you will be able to view the video from FPV camera
Specifications:
1.5.8GHz Receiver Specs:
Input voltage: 3.7V-5V
Current consumption: 230mA-240mA
Operating Frequency: 5.8GHz
Available channel: 32 Channels(5645Mhz-5945Mhz)
Sensitivity: ≤-90dBm
Video formats: NTSC/PAL
Video impedance:75ohm
Audio carrier: 6.5Mhz
Antenna connector: SMA
Antenna input impedance:50ohm
Antenna Gain:2dBi
Built-in chargeable lithium battery:1450mAh
2.WiFi Transmitter specs:
Power supply:3.7V-5V
Consumption current:220mA
Transmitting frequency:2400MHz-2483.5MH
Frame rate:30fps
Video Resolution:VGA
Video compression:H.264
Wireless protocols:IEEE 802.11b, IEEE 802.11g,IEEE 802.n (1T1RModes)
Encryption mode:WPA2
Weight: 140grams
Dimension:67x88x16mm
Operation temperature: -10℃~+50℃
Operation humidity: 15%~85%RH
Features:
5.8GHz AV signal to WiFi, realize mobile&tablet long range video transmission
Plug&play,accessories ready for easy installation to remote control
Realtime,short latency less than0.2 second for video transfer
Work with 5.8GHz TX,transmission range depends on 5.8GHz TX
WiFi transfer to mobile devices and AV out to monitor at same time,enjoy interactively multi-viewing
Built in 1500mAh rechargeable battery, enjoy 100 minutes performance time.
Fast 3 hours for full charging with USB cable
Operations for ios&android system client
A.APP Installation
1.Turn on your mobile device and enter APP Store or Google Play Store.
2.Search TOTEM software, and download.
3.Install the APP software.
B.WiFi Connection:
1.Power on 5.8GHz transmitter and FPV camera firstly.
2.Power switch on WiFi device,WiFi switch on,WiFi LED turn green.
3.Open your devices WiFi setting and locate the WiFi name TOTEM. Connect to TOTEM WiFi (Default password: 12345678).
4.With the WiFi connected, open the TOTEM app,you will be able to view the video from FPV camera
Specifications:
1.5.8GHz Receiver Specs:
Input voltage: 3.7V-5V
Current consumption: 230mA-240mA
Operating Frequency: 5.8GHz
Available channel: 32 Channels(5645Mhz-5945Mhz)
Sensitivity: ≤-90dBm
Video formats: NTSC/PAL
Video impedance:75ohm
Audio carrier: 6.5Mhz
Antenna connector: SMA
Antenna input impedance:50ohm
Antenna Gain:2dBi
Built-in chargeable lithium battery:1450mAh
2.WiFi Transmitter specs:
Power supply:3.7V-5V
Consumption current:220mA
Transmitting frequency:2400MHz-2483.5MH
Frame rate:30fps
Video Resolution:VGA
Video compression:H.264
Wireless protocols:IEEE 802.11b, IEEE 802.11g,IEEE 802.n (1T1RModes)
Encryption mode:WPA2
Weight: 140grams
Dimension:67x88x16mm
Operation temperature: -10℃~+50℃
Operation humidity: 15%~85%RH
Features:
5.8GHz AV signal to WiFi, realize mobile&tablet long range video transmission
Plug&play,accessories ready for easy installation to remote control
Realtime,short latency less than0.2 second for video transfer
Work with 5.8GHz TX,transmission range depends on 5.8GHz TX
WiFi transfer to mobile devices and AV out to monitor at same time,enjoy interactively multi-viewing
Built in 1500mAh rechargeable battery, enjoy 100 minutes performance time.
Fast 3 hours for full charging with USB cable
